Watering houseplants by checking first: how much, how often, and what to write down
A check that fits each plant, water given until it drains, the saucer emptied, tap water's chloramine, fluoride and softener questions answered, salts leached, and a drying interval logged for each plant.
- Start here: the essentials
- 1. Checking before you water
- 2. How much water, and draining it
- 3. The water log and your plant's own interval
- 4. What is in the tap water
- 5. Salts, and leaching them out
- 6. Winter and the other seasons
- 7. See it
- 8. Practice
- 9. Your plants
- 10. Check your work
- 11. Knowledge check and scenario
Start here Essentials
At minimum this chapter asks you to check each plant before you water it and write down what you found. Everything marked Go deeper is optional on a first pass.
- Look up each plant's watering cue in Plants, one by one: what to check, and how dry it should be (Checking before you water).
- Check the soil at that depth, or lift the pot and compare its weight with how it felt just after watering (Checking before you water).
- Water only if it is dry to the cue, until water runs from the drainage hole, then empty the saucer; if it is not dry, leave it (How much water).
- Write the date and what you found on the water log in Plant cards and logs, whether you watered or not (The water log).
Minimum time: about 2 minutes a plant per check. Done when: the water log has a row for each plant with a date and a finding.
1. Checking before you water Understand
Missouri Extension says improper watering probably kills or injures more houseplants than any other single factor, and that no general schedule works (Missouri Extension, Caring for Houseplants). The extension services we read agree on the remedy: check the plant before you water, not the calendar. Convention Illinois Extension lists what changes how fast a pot dries: the kind of plant, temperature, humidity, light, the size of the pot and the plant, the mix and the drainage (Illinois Extension, Watering). Colorado State adds air movement and the container (CSU PlantTalk, Houseplants: Watering). Every one of those differs between your plants, and most of them change through the year. A rule such as "once a week" fixes one number to a rate that moves.
A check answers one question: has this plant used or lost enough water since the last watering to need more? Each plant has a watering cue, the condition it should reach before you water: dry on the surface, dry an inch or two down, or dry right through. The cue for each of the thirty plants in this manual is in Plants, one by one, with its source. Colorado State sorts plants into two kinds: those that need even moisture, watered when the top layer begins to feel dry, and those that prefer slight drying, checked below the top layer and watered before the soil is completely dry or the plant wilts. A few examples from the reference show the spread:
- Pothos. Clemson's pothos sheet says to let the soil dry completely, then water thoroughly (Clemson HGIC, How to Grow Pothos Indoors).
- Snake plant. NC State says to let the soil dry between waterings from spring to autumn, and in winter to water only every one to two months (NC State Plant Toolbox, Dracaena trifasciata).
- Boston fern. Clemson's fern sheet says to keep the soil barely moist, without letting it dry out.
- Aloe and other succulents. NC State says to let the soil dry completely between waterings (NC State Plant Toolbox, Aloe vera).
UConn Extension adds a rule of thumb: plants with thick or waxy leaves, or few leaves, need less water than plants with many soft, lush leaves (UConn Extension, Watering Houseplants). Missouri says flowering plants generally need more water than foliage plants of the same size.
The checks
There are four practical checks, and one instrument whose readings need care. Use the one that fits the plant and the pot; on most plants, two together settle the question faster than one.
| Check | How | What it tells you | Its limits | Sources |
|---|---|---|---|---|
| Finger depth | Push a finger into the mix near the edge of the pot, to the depth the cue gives | Whether the mix is dry, damp or wet at that depth | Reaches 2 to 3 in at most; misses the bottom of a deep pot | Texas A&M (Master Gardener Handbook), Maryland, Illinois, UConn |
| Pot weight | Lift the pot just after a thorough watering, then at each check | How much water the whole pot holds, bottom included | Works best on pots you can lift; you learn the weights by feel | Maryland, Colorado State, Purdue |
| Wooden skewer | Push a plain wooden skewer or chopstick to the bottom, wait, pull it out | Damp mix sticks to the wood; dry mix falls off as powder | The wood absorbs water; dry it before you use it again | Maryland (Ask Extension), Vermont |
| Color and edge | Look at the surface and at the rim of the mix | The surface lightens as it dries; mix that pulls away from the pot is very dry | Surface only; by the time it pulls away, Missouri says some roots are damaged | Missouri, Colorado State |
| Probe meter | Push the probe in and read the dial | A reading that changes with water, and also with salts | Not tested in potting mix by any source we found; see Go deeper | Illinois, Maryland (Ask Extension), Adla and others (2020) |
Finger depth. Texas A&M's Master Gardener Handbook chapter gives the reason the depth matters: most roots sit in the bottom two-thirds of the pot, so you water when that zone starts to dry. For a 6 in pot it puts the finger about 2 in in, to the second joint, and for smaller pots about 1 in (Texas Master Gardener Handbook, House Plants). Maryland's Ask Extension answer adds about 3 in for very large pots (Maryland Extension on Ask Extension, House Plant Moisture Meters). Convention We use Texas A&M's scaling as the default: about 1 in for a small pot, about 2 in for a 6 in pot, about 3 in for a large one. The sources' other depths are compared in the Go deeper block below. If your finger cannot get 2 in down, Maryland says the mix may need to be more porous or the plant may be root-bound (Maryland Extension, Watering Indoor Plants); Repotting, pruning and propagating covers both.
Pot weight. Maryland says a plant with dry mix weighs much less, and Purdue says weight is a good indicator for small plants (Purdue Extension, HO-39 Indoor Plant Care). Clemson's hoya sheet puts it as learning how light the pot is when dry. No source gives weights or a routine for calibrating them, so here is ours, labeled as such. Test it Lift each pot right after a thorough watering, once it has drained, and remember the feel. At each later check, lift it again. A pot that feels close to its watered weight does not need water whatever the surface looks like. A kitchen scale gives a number if you want one; the log has a note column for it.
Wooden skewer. Maryland's Ask Extension answer suggests a wooden skewer, a screwdriver or a popsicle stick when the root ball is too dense for a finger: damp soil sticks to wood and dry soil is powdery. Vermont Extension suggests a chopstick in the same way (UVM Extension, Houseplant Care During Winter Months). The skewer reaches the bottom of a deep pot, where a finger cannot.
Color and edge. Missouri says the surface lightens as it dries, that mix kept too wet turns sticky and slimy, and that mix that has cracked and pulled away from the pot's sides has dried so far that some root damage has already occurred. Colorado State notes the practical problem with that gap: water poured on top runs down it and out of the hole, leaving the root ball dry. The fix for that is in How much water.
Wilting is not a check
A wilted plant is often thirsty, but Illinois and Maryland both say overwatered plants can wilt too, because roots that sit in wet mix die and stop taking up water. UConn describes the sequence: water left in a saucer keeps the mix saturated, pushes out the air, kills roots, and the plant then looks wilted. So a drooping plant is a reason to check, not a reason to water. If the mix is wet and the plant is wilting, Reading symptoms takes it from there. Maryland's short version of the two directions: too dry, the plant wilts and turns gray-green; too wet, it drops leaves or turns yellow.
How deep to check: who says what. Illinois and Maryland say about 2 in. Maryland's Ask Extension answer says 1 to 2 in, perhaps 3 in very large pots. UConn, Iowa State's winter watering answer and Wisconsin say about 1 in. Purdue says water when the mix is dry 1/4 in down and the pot sounds hollow when tapped. Colorado State frames it by plant type, not by depth. Texas A&M is the one source that ties the depth to the pot (1 in for small pots, 2 in for a 6 in pot), which is why we use it as the default; the others are consistent with it if their advice was written with a medium pot in mind, though none says so.
Probe meters and the one sensor study. Illinois says a probe can be useful but is not reliable every time. Maryland's Ask Extension answer says they have not tested meters but think they are probably less accurate than a finger. Vermont suggests a meter as one option in winter. No source we found tested a consumer houseplant meter in potting mix. The closest study is Adla and colleagues (2020), who tested low-cost soil moisture sensors in repacked soils. After calibration for each soil, the capacitive sensors came close to a reference sensor; the very cheap resistive sensors, the forked-probe type, were less accurate and were affected by temperature and salinity (Adla and others, Sensors, 2020). Physical principle A resistive probe measures how easily current passes between its tips, and dissolved salts carry current as well as water does, so a salty dry mix can read wetter than it is. The study did not test peat or bark mixes. If you use a meter, use it as a fifth check beside the finger or the skewer, and write which check you used in the log, so you can see over time whether the two agree on your plants.
2. How much water, and draining it
When the check says water, water thoroughly. Convention Every source we read says to water until it runs out of the drainage hole. Texas A&M gives two reasons: it wets the lower root zone, and it washes out salts. It puts a number on it: about one-tenth of the water you pour should come out of the bottom. UConn says to apply enough that the excess seeps from the holes after about a minute, and that light, shallow watering encourages a poor root system. Purdue's method suits a mix that sheds water: water until it drips, wait a few minutes, and water again until it drips.
Then let it drain, and get rid of what drained. Wisconsin Extension says to let water drain into the saucer for 10 to 20 minutes, then empty the saucer or raise the pot above it (Wisconsin Extension, Houseplant Care). UConn says to empty saucers and cachepots within an hour or so. Missouri says to discard water still under the pot one hour after watering. Texas A&M explains why it matters even for a healthy pot: salts in the runoff are taken back up if the pot sits in it, including through the wall of a clay pot.
A saucer is the dish under a pot; a cachepot is a decorative outer pot, often without a hole, that a draining pot sits inside. Both hold water against the bottom of the pot if you let them. A cachepot hides it: the only way to know is to lift the inner pot out and look. Pots, potting mix and drainage explains why a pot without a drainage hole stays wet at the bottom, and how to set up a cachepot so it does not.
Water that runs straight through
If water pours out of the hole within seconds and the mix is still dry when you check below the surface, the root ball has shrunk away from the pot. The root ball is the mass of roots and mix that comes out of the pot in one piece. Colorado State says to check below the surface after watering that the mix is evenly moist. Washington State's handbook says peat-based mixes are hard to rewet once they dry out (WSU Extension, PNW Gardener's Handbook, Chapter 14: Houseplants).
- Set the pot in a sink, bucket or basin. Use one deep enough that water can cover the top of the mix.
- Fill until the water covers the mix. WSU says an inch or two over the soil.
- Wait until the bubbles stop. UConn and WSU both use this as the sign the mix has taken up water.
- Lift it out and let it drain fully before it goes back on its saucer or into its cachepot.
Purdue says water should stand on the surface for no more than a few seconds; if it pools, the mix may need more perlite or sand, which is a question for Pots, potting mix and drainage.
Temperature of the water
Illinois, the RHS and WSU all say to use room-temperature water, not cold (RHS, How to grow houseplants). The plants where it shows are African violets: Missouri says they suffer chill injury from sudden changes in leaf temperature, and Minnesota Extension says water on their leaves causes spots, so it waters the mix only, or from below in about an inch of room-temperature water (UMN Extension, African violets). No source puts a number on "room temperature". Preference Filling the can after watering, so it stands until the next round, is the simplest way to have it ready.
Bottom watering. Bottom watering means setting the pot in water so the mix draws it up through the hole, instead of pouring it on top. Missouri dunks the pot to just below the rim; Illinois stands it in a few inches of water and takes it out when moisture shows at the top; Maryland sets it in water and empties the excess. WSU lists the benefits: the leaves stay dry, so fewer leaf spots, and the surface stays drier, so fewer fungus gnats, less algae and mold; it says it can take time. Colorado State says top watering is generally better, because bottom watering lets salts build up in and on the mix; Missouri and Purdue say the same and advise watering from the top now and then to wash them out (Purdue says monthly). No source we found compared the two in a study. Convention Our default is top watering. Bottom-water a plant whose leaves spot when wet, such as an African violet, and top-water it until it drains every so often to flush the salts; record which you did in the log's note column.
3. The water log and your plant's own interval
Checking tells you what to do today. Writing it down tells you, after a few weeks, how fast this plant dries in this pot, this mix and this spot. That is the one number no plant tag or extension sheet can give you, because Illinois's list of factors is different in every home.
This is our method. No source we found prescribes logging drying time. The extension services prescribe the check; the log is ours, built on their checks. It records what you saw. It does not tell the plant what to do.
What a row holds
The water log in Plant cards and logs takes one row per check, whether or not you watered:
| Column | What to write |
|---|---|
| Date | The day you checked |
| Plant | Which plant, from your plants sheet |
| Check used | Finger depth, pot weight, skewer, meter, or look |
| Finding | One of five: wet, damp, dry to the cue, dry throughout, wilting |
| Watered | Ticked if you watered |
| Drained and saucer emptied | Ticked once the saucer or cachepot is empty |
| Note | Anything else: a weight, a soak, a leach, a move to a new spot |
The five findings are in order of dryness. Wet and damp mean leave it. Dry to the cue means the plant has reached the condition its cue names. Dry throughout means it went further than the cue: for a succulent that may be the cue itself; for a fern it means you were late. These two are the findings that count for the interval. Wilting is recorded as seen, with the finding of the soil check in the note, because wilting has more than one cause.
How the interval is worked out
The plant card in Plant cards and logs counts the days between one "dry to the cue" or "dry throughout" finding and the next for each plant. Once three such findings are logged, giving at least two gaps, it shows the drying interval: the median of those gaps (the middle value when they are put in order, or the average of the two middle values) and the range from shortest to longest. Until then it says "not enough checks yet". A median is used instead of an average so that one odd gap, a week away or a missed check, moves it less.
An example of the arithmetic, not from any real plant: dry findings on March 1, March 9, March 16 and March 26 gives gaps of 8, 7 and 10 days. In order they are 7, 8, 10, so the median is 8 days and the range 7 to 10.
Two habits keep the number honest. Check before the plant is likely to be dry, not after, so the "dry to the cue" date is close to the day it got there; a plant checked only once a week can only show intervals in whole weeks. And write every check, including the ones where you did not water; a row that says damp is what shows the plant was not yet dry on that day.
Why it drifts
The interval describes one plant in one set of conditions, and those conditions change. It shortens or lengthens when the season turns (Winter and the other seasons), when the plant grows and fills the pot with roots, when it is repotted into fresh mix or a bigger pot, when it moves to a brighter or warmer spot, and when the heating comes on. When any of those happens, write it in the note column. Test it The intervals before and after the change are then two separate stories, and comparing them shows you what the change did.
The log describes the past. The interval is a prompt to check, not an instruction to water: when the date comes round, check the plant, and water only if the check says so. A plant that has not dried by then has told you something (less light, a cooler room, a change in season), and watering it on the date anyway would put back the calendar this chapter replaces. The interval also says nothing about whether the plant is healthy; a plant with rotting roots dries slowly. For that, look at the plant and at Reading symptoms.
4. What is in the tap water
For most houseplants, the sources treat ordinary tap water as fine. Missouri says tap or well water is usually satisfactory, and WSU says tap water is safe for most plants. Four things in or about tap water come up again and again: the disinfectant, fluoride, a water softener, and temperature (covered above). Each has a different answer, and the first step for the first three is the same: find out what your water has in it.
Ask the authority Your water utility can tell you which disinfectant it uses and whether it adds fluoride; its water-quality report or its customer service line is the place to ask. If you have a well or a water softener, the person who installed it, or its manual, is the place to ask about what it does to the water.
| Question | Short answer | What changes it | Sources |
|---|---|---|---|
| Chlorine | Leaves water that stands in an open container | Only if your utility uses chlorine, not chloramine | RHS, WSU, Maryland |
| Chloramine | Does not leave by standing or boiling; the sources treat it as safe for garden plants | Fish and other water animals are a different matter | EPA; SFPUC (republished by Stanford) |
| Fluoride | Most plants are unaffected; a named group shows brown tips | Whether your plant is on the sensitive list | PNW Handbooks, Arkansas, NC State |
| Softened water | Avoid it for plants | Whether your tap bypasses the softener | RHS, WSU, Missouri, UConn, Maryland |
Chlorine and chloramine
Utilities disinfect water with one of two things. Free chlorine is chlorine on its own; chloramine is chlorine combined with ammonia. The RHS says to let water stand in an open container for at least 24 hours, WSU says to let chlorinated water stand overnight, and Maryland says a day's standing should clear the chlorine. That advice works for free chlorine. It does not work for chloramine. EPA says chloramines give longer-lasting disinfection as water moves through the pipes, and that more than one in five Americans drink chloraminated water (Chloramines in Drinking Water); its question sheets call monochloramine more chemically stable than chlorine and say it does not dissipate quickly. The San Francisco Public Utilities Commission's question and answer sheet, republished by Stanford's water utility, says boiling, adding salt or letting water stand does not remove chloramine (SFPUC, Domestic Water Disinfection Using Chloramines).
The same sheet says chloraminated water is safe for watering the garden, and describes it as as safe as chlorinated water for plants and animals that do not live in water; the hazard it names is to fish, amphibians, reptiles and people on dialysis. So for houseplants on chloraminated water, standing the can overnight does no harm and brings it to room temperature, but it does not remove the chloramine, and the sources we read do not say it needs removing for plants. Product-specific If you keep fish, frogs or turtles, their water is a separate question for the maker of the treatment product you use.
Fluoride
The Pacific Northwest plant disease handbook says many city supplies add fluoride at about 1 ppm, and that watering sensitive plants with it can cause injury. Fluoride tip burn is the result: fluoride travels with the water to the leaf margins and tips and builds up there, and the tips and edges die and turn brown, spreading inward (PNW Handbooks, Fluorine Toxicity in Plants). The handbook adds that drought stress or salt build-up can look the same, which is why a brown tip is a reason to check the log and the salts before blaming the water. NC State's 1996 grower bulletin says as little as 1 ppm in irrigation water can cause symptoms on sensitive plants (NC State, Does Perlite Play a Role in Fluoride Toxicity). Arkansas's plant clinic calls it "seldom fatal" on dracaenas (Arkansas Plant Health Clinic Newsletter, Issue 11).
The three sources name these of the manual's thirty plants as sensitive:
| Plant | Named by |
|---|---|
| Corn plant (Dracaena fragrans) | PNW ("very sensitive"), Arkansas |
| Madagascar dragon tree (Dracaena marginata) | Arkansas; NC State lists the genus Dracaena |
| Spider plant (Chlorophytum comosum) | PNW, Arkansas, NC State |
| Peace lily (Spathiphyllum) | Arkansas, NC State; WSU names it too |
| Calathea | NC State |
| Prayer plant (Maranta) | Arkansas, NC State |
| Parlor palm (Chamaedorea elegans) | Arkansas, NC State |
| Cast-iron plant (Aspidistra) | Arkansas |
The lists were written when the snake plant was still Sansevieria, before it was moved into Dracaena, and none of them names it; we do not count it as sensitive. Pothos is on none of the lists.
For a plant on the list, the PNW handbook's advice is to avoid fluoridated water, high-phosphate fertilizers and a low soil pH, and it names reverse osmosis, distillation and charcoal treatment as ways to reduce fluoride in water. Arkansas says to water sensitive plants from a non-fluoridated supply. Convention Our default: if a plant on the list shows brown tips and your water is fluoridated, water that plant with rainwater or distilled water and see whether new leaves stay clean; leave the other plants on tap water. Letting the water stand is not part of the default, for the reason in the Go deeper block below.
Softened water
A water softener takes calcium and magnesium out of water and puts other salts in their place. The sources agree on avoiding it for plants, in different strengths. The RHS says water from domestic softeners contains salts that are highly toxic to plants. WSU says not to use softener water unless the system has a deionizing unit to remove the sodium. Missouri says softened water should not be used continuously. Maryland says softened water carries more dissolved minerals and should be avoided, and Missouri lists softened water among the causes of brown leaf tips. UConn suggests an outdoor tap that is not on the softener, rain-gutter water or bottled water. None of these sources gives a sodium figure, so we give none. Ask the authority Many installations leave one tap, often the kitchen cold tap or an outdoor tap, off the softener; the installer or the softener's manual says which.
Does standing remove fluoride? Who says what. Illinois and Wisconsin both say that letting tap water sit for 24 hours lets chlorine and fluoride dissipate or evaporate. The PNW handbook, written by an Oregon State plant pathologist, says fluoride in water usually stays in solution as fluoride ions, and names reverse osmosis, distillation and charcoal treatment as the ways to reduce it; nothing in it suggests standing works. Arkansas says to use a non-fluoridated supply. No agency source we found says outright that standing fails for fluoride. Physical principle Our default follows the PNW handbook: fluoride is dissolved as an ion, not a gas, so we do not rely on standing to remove it.
Is tap water a problem for plants? Missouri says the chlorine and fluorine added to city water "do not harm plants", and the SFPUC sheet calls chloraminated water fine for gardens. The RHS, WSU, PNW, Arkansas and NC State name fluoride-sensitive plants. The two are reconcilable: most plants are unaffected, and a named group is sensitive.
Rainwater, dehumidifier water, filtered, distilled and reverse osmosis. Missouri calls rainwater and snowmelt excellent. Maryland names rainwater and the water from a dehumidifier's drain pan as mineral-free sources. Minnesota's African violet page suggests room-temperature distilled, rain or reverse-osmosis water and not softened or chlorinated water. The PNW handbook says reverse osmosis, distillation or charcoal treatment reduce fluoride; it does not name a particular filter, and we found no source on whether a pitcher filter removes fluoride, so we make no claim about one. Test it If you switch a sensitive plant's water, note the date in the log and watch whether the new leaves come in clean; old brown tips do not recover.
5. Salts, and leaching them out
Soluble salts are the minerals left behind in the mix when water evaporates: from fertilizer, and from hard or softened water. Maryland says they make it harder for roots to take up water, and lists the signs: reduced growth, brown leaf tips, dropping lower leaves, dead root tips, wilting, and a white crust at the soil line, at the drainage hole or on the outside of a clay pot. At very high levels it says water is drawn out of the root tips. Texas A&M and WSU give a sense of why homes see it more than greenhouses: a plant may be injured at 200 ppm salts in a home, while the same plant in a greenhouse, with good light and drainage, tolerates 2,000 ppm.
Watering until about a tenth drains, as in How much water, carries some salts out every time. Leaching is a larger flush, done on purpose:
- Scrape off any crust first. Texas A&M and WSU say to remove the crust but not more than 1/4 in of mix.
- Pour through twice the pot's volume of water. Convention Maryland, Texas A&M and WSU agree on at least twice the volume. Texas A&M and WSU give the example: a 6 in pot holds about 10 cups, so use about 20. The pot calculator in the calculators scales that example to other pot sizes, as an estimate.
- Pour slowly, in several rounds, so the water passes through the mix rather than down the sides. Do it in a sink, a tub or outside.
- Let it drain fully before it goes back on its saucer.
- Write it in the log's note column. A leach resets the pot's water, so the next "dry to the cue" finding may come later than usual.
Convention How often: Maryland, Illinois, WSU and Texas A&M say every four to six months. Maryland and Texas A&M say to leach before fertilizing, not after, so you do not wash out the feed you just gave, and Maryland says to leach every newly bought plant at its first watering. Feeding covers what too much fertilizer looks like and how leaching fits the feeding schedule.
How often: who says what. Maryland, Illinois, WSU and Texas A&M say every four to six months. Purdue does not give a leaching interval; it says to water from the top once a month to prevent build-up. Colorado State, Missouri and Purdue tie the need to bottom watering, which carries no water out of the hole. We use four to six months for top-watered plants. A plant you bottom-water gets a top watering that drains at least once a month, following Purdue, and a leach on the same four to six month round.
6. Winter and the other seasons
Iowa State says houseplants need water less often in winter than in spring and summer, and its test is the same as the rest of the year: water when the mix is dry about an inch down, until it flows from the bottom (Iowa State, How often should houseplants be watered during the winter months?). Vermont Extension says short, dim winter days bring on a resting state in which growth slows, and that winter care starts with reducing water: wait until the mix is truly dry. It says some cacti and succulents go into a deeper dormancy, a rest in which they grow little and use little water. Wisconsin says actively growing plants need more water than plants in slow winter growth.
There is a second force pulling the other way. The RHS says pots dry faster in winter when heating lowers the humidity, and that plants in a cool room need water less often. UConn says plants dry faster near heat sources in winter. So a plant in a cool, dim room may go much longer between waterings in winter, while one beside a radiator or a heating vent may dry as fast as in summer, or faster. Test it Which of the two wins in your home is a question the log answers and no source can: the interval for each plant shows it.
- Keep checking on the same schedule. The interval will lengthen for most plants; checking less often loses the "dry to the cue" date.
- Follow the winter cue where the reference gives one. NC State's snake plant cue changes in winter to every one to two months; Clemson's jade plant sheet says to keep it moist in spring and summer and to let it dry between waterings in winter (Clemson HGIC, Jade Plant).
- Note when the heating goes on and off. Those dates divide the log into seasons, and Humidity, temperature and seasons uses them.
- Expect some leaf drop on a few plants. Vermont says alocasias and caladiums may drop leaves in winter and calls it normal. It is a reason to check, not to add water.
In spring the change runs the other way: longer days, new growth, and an interval that shortens. A plant moved outdoors for summer dries on a different clock again; start its log afresh and note the move. Time away from home, a weekend or longer, is in Humidity, temperature and seasons.
7. See it See it
Dee's first two checks. Dee (fictional) rents a studio with one east-facing window over her desk. Her pothos is in a 6 in plastic nursery pot on the desk, 2 ft from the glass. Her snake plant is in a 6 in nursery pot set inside a holeless ceramic cachepot on the floor, 8 ft from the window. Her city water is chloraminated, according to her utility's report. Her Light survey puts the desk spot at about 254 fc (the medium band) and the floor spot at about 77 fc (the low band), read with a phone app, which is an indicator rather than a meter; a brighter, warmer spot generally dries a pot faster, which is one reason the two plants will not share an interval.
Known: both pots are 6 in; the cachepot has no hole; the water is chloraminated. Assumed: that the snake plant's nursery pot has a drainage hole, which is Dee's assumption until she lifts it out of the cachepot and looks. Open: how many days the pothos takes to dry at the desk, settled only by her water log over the coming weeks; whether water collects in the cachepot after watering, settled by lifting the inner pot out an hour after she waters.
The pothos. On her plants sheet she calls it "Desk pothos", and her log rows use the same name. Its cue in the plant reference is to let the mix dry, then water thoroughly (Clemson). For a 6 in pot, Texas A&M puts the finger check about 2 in down. At her first check she finds the mix damp at 1 in, so she leaves it and writes the date, "Desk pothos", "finger depth", "damp", with the watering box unticked. At a later check it is dry at 2 in. She waters at the sink until water runs from the hole, lets it drain, empties the saucer, and writes "dry to the cue", watered, drained and saucer emptied. She lifts the pot once it has drained, to learn its watered weight.
The snake plant. Its cue is dry between waterings, and in winter every one to two months (NC State). A finger cannot reach the bottom of the pot inside the cachepot, so Dee lifts the nursery pot out, pushes a wooden skewer to the bottom and checks it for clinging mix. When it is dry, she waters the nursery pot in the sink, lets it drain there, and only then sets it back in the cachepot, following WSU's advice to lift the inner pot out to water. An hour later she checks that the cachepot holds no water, which settles the second open fact.
The water. Because her water is chloraminated, standing it overnight will not remove the disinfectant; the SFPUC sheet describes chloraminated water as safe for gardens, and neither of her plants is on the fluoride lists. She keeps a filled can by the window so the water is at room temperature.
What she can and cannot say yet. After her first two rows, the pothos card says "not enough checks yet". Only after three dry findings ("dry to the cue" or "dry throughout") will it show a median and a range, and that will describe the desk in the current season. Under these assumptions, it potentially changes when winter heating starts; her log will show whether it does.
- Maryland Extension, Watering Indoor Plants: the finger and lift tests, salts and leaching on one short page.
- Maryland Extension on Ask Extension, House Plant Moisture Meters: the skewer method and an honest note on meters.
- CSU PlantTalk, Houseplants: Watering: weight, feel and color, and the case for watering from the top.
- SFPUC chloramine question and answer sheet: what standing and boiling do and do not do to chloramine.
8. Practice Practice
Minimum: one check and one log row for each plant you own. Time: about 15 minutes for two plants, plus 2 minutes a plant at each later check. Materials: your plants, a wooden skewer or chopstick, a watering can filled the day before, a sink or basin, and the water log or a sheet of paper.
- Read each plant's cue. Open Plants, one by one and note what to check and how dry it should be. If you do not know what a plant is, Matching plants to light shows how to name it exactly.
- Choose the check for each pot. Finger depth for a pot you can reach into, scaled to its size; pot weight for anything you can lift; a skewer for a deep pot or a pot inside a cachepot.
- Check, and decide. Wet or damp: leave it. Dry to the cue: water. Dry throughout or wilting: water, and note it, because the cue was passed.
- Water thoroughly and drain. Until it runs from the hole; let it drain 10 to 20 minutes; empty the saucer or cachepot. Lift the pot once it has drained to learn its watered weight.
- Write the row. Date, plant, check used, finding, watered, drained. Add a note for anything unusual.
- Set your next check. A few days on for a plant that was damp; sooner rather than later for one you just watered, so you catch the day it dries.
- Calibrate a second check. For a month, use two checks on one plant at each visit (finger and weight, or skewer and meter) and write both in the note. You will see which agrees with the plant's behavior, and you can then use the quicker one.
- Find out your water. Look up your utility's report or call it: chlorine or chloramine, and whether fluoride is added. If you have a softener, find out which taps bypass it. Write the answers on your plant file's contacts sheet.
- Set a leaching date. Pick a date four to six months from now and put it in the log as a note on each plant.
9. Your plants Your plants
10. Check your work Check your work
Criteria
- Does every plant you own have a watering cue written down, with where it came from?
- Does each pot have a check that reaches the depth its cue names?
- Did water run out of the hole each time you watered, and was the saucer or cachepot empty within the hour?
- Does the water log have a row for each plant, with a date and a finding, including the checks where you did not water?
- Do you know whether your water is chlorinated or chloraminated, fluoridated or softened, or have you written down whom to ask?
Worked example
Dee's first checks meet the criteria: both plants have cues from the reference, the pothos gets a finger check at the depth Texas A&M gives for its pot, the snake plant gets a skewer because the cachepot hides the bottom of its pot, both are watered in the sink and drained before going back, and both have log rows. Her water question is answered from her utility's report. What she cannot meet yet is an interval; that needs three dry findings per plant.
Common mistakes
- Watering a little, often. The surface gets wet and the bottom stays dry. If no water comes out of the hole, you have not watered thoroughly.
- Leaving water in the cachepot. It is out of sight. Lift the inner pot an hour after watering.
- Logging only the days you water. The "damp" rows are what show how long the plant took; without them the log cannot tell a slow plant from a forgotten one.
- Treating the interval as a schedule. When the date comes, check. If the plant is still damp, write that down and wait.
- Standing chloraminated water to remove the chloramine. Standing warms it to room temperature, which is useful, but the sources say it does not remove chloramine.
- Watering a wilted plant without checking the mix. Wet mix and wilting together point to root trouble, not thirst.
What is still unresolved
This chapter cannot tell you how fast your plants dry; only your log can, and only for the conditions it was written in. Whether your pots and mix drain as they should is in Pots, potting mix and drainage. Whether a yellow leaf or a brown tip comes from water, light, salts or something else is in Reading symptoms. What your water contains is a question for your utility, and for a softener, its installer.